Skip to main content
Loading...
safety

Fall Protection Equipment Inspection

OSHA 1926 Subpart M PFAS pre-use + annual inspection — harness, lanyard, SRL, anchors, connectors.

14 days free, $0 today — this template is included, and everyone else in your company uses it free.

Rolled out to every employee at AutoZone (125,000), PetSmart (50,000+), A.S. Watson and Raley's (20,000) — and at larger retailers we are not permitted to name.

Built for: Construction · Window Cleaning · Telecom · Tower Climbing · Roofing

What's inside this template

Harness

  • Webbing free of cuts, frays, burns, chemical damage (critical · weight 1.0)
  • Stitching intact (no loose, broken, missing threads) (critical · weight 1.0)
  • D-rings free of cracks, deformation, sharp edges (critical · weight 1.0)
  • Buckles operate freely; no rust or distortion (weight 1.0)
  • Labels legible (manufacturer, ANSI Z359 / OSHA, mfg date) (critical · weight 1.0)
  • Within manufacturer service life (typically 5 years) (weight 1.0)

Lanyard / SRL

  • Energy absorber pack intact, no signs of deployment (critical · weight 1.0)
  • Lanyard webbing free of damage (weight 1.0)
  • SRL retracts smoothly and locks under quick pull (critical · weight 1.0)
  • Connector hooks: gates close fully, springs strong (critical · weight 1.0)
  • No signs of corrosion or chemical exposure (weight 1.0)

Anchor & Connectors

  • Anchor rated for 5,000 lb static or engineered to 2x maximum arresting force (critical · weight 1.0)
  • Connector compatible with anchor (no rollout risk) (critical · weight 1.0)
  • No two snap hooks connected to a single D-ring (weight 1.0)

Documentation

  • Inspection record signed and dated (critical · weight 1.0)
  • Equipment ID / serial recorded (weight 1.0)

Common use cases

Pre-use harness check
Annual competent-person PFAS inspection
OSHA 1926 Subpart M compliance

Frequently asked questions

How often must a harness be inspected?

OSHA 1926.502(d)(21) requires inspection prior to each use. ANSI Z359 also calls for annual inspection by a competent person other than the user.

When must a harness be retired?

Mandatory retire-from-service: any cuts, fraying, chemical contamination, exposure to flame, deployed energy absorber, or post-fall arrest event.

Go deeper on the topic

Related concepts
  • A daily huddle is a brief (10–15 minute) standing meeting held at the start of a shift or workday to align the team on priorities, surface issues, and...
  • A deskless worker is any employee whose job happens without a desk, a company laptop, or a fixed workstation. They're roughly 80% of the global workforce —...
  • A frontline employee app is a phone-first application that gives hourly, field, and deskless workers access to their schedule, pay, announcements, training,...
  • A frontline worker is any employee whose job happens away from a desk — on a production floor, in a patient room, behind a store counter, in a customer's...

Ready to use this template?

Start free with Safety & Compliance — Fall Protection Equipment Inspection is included, and everyone else in your company uses it free.

Rolled out to every employee at AutoZone (125,000), PetSmart (50,000+), A.S. Watson and Raley's (20,000) — and at larger retailers we are not permitted to name.